Walksnail Avatar HD Nano Kit V3
The Walksnail Avatar HD Nano Kit V3 features 32GB of built-in storage, and supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images.
About this Product
The Walksnail Avatar HD Nano Kit V3 features 32GB of built-in storage, and supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flying footage with exceptional clarity and detail. This kit is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range. With Canvas Mode and customizing OSD, colors and patterns you like can easily be adjusted with the parameters you want via remote control.
VIDEO: Walksnail RACING mode! New V3 camera and VTX and new firmware too!
Features
- Nano Camera 14*14mm
- Built-in 32G storage
- 18.5g light-weight
- 4:3 native sensor
- 1080P/60fps
- Metal case
- FOV160°
- 3.1~13V
- 500mW
Specifications
AVATAR HD NANO CAMERA V3
- Resolution: 1080P/60fps, 720P/120fps, 720P/60fps
- Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor
- Coaxial Cable: 90mm (default) / 140mm
- Model: Avatar HD Nano Camera V3
- Min. Illumination: 0.001Lux
- Dimensions: 141416.8mm
- Weight: 3g (without cable)
- Shutter: Rolling Shutter
- Ratio: 4:3 native / 16:9
- Aperture: F2.0
- Lens: 2.1mm
- FOV: 160°
AVATAR HD MINI VTX V3
- Supported FC System: Betaflight, Inav, Fettec, Kiss, ArduPilot
- Mounting Holes: 25.525.5mm (M2 hole); 2020mm (M3 hole)
- I/O Interface: JST1.04 (Power in), JST0.84 (USB)
- Communication Frequency: 5.725-5.850GHz
- Operating Temperature: -20-40℃
- Latency: Average latency 22ms
- Model: Avatar HD Mini VTX V3
- Dimensions: 31.531.59.4mm
- Wide Power Input: 3.1V-13V
-
Transmitter Power (EIRP):
- FCC: <27dBm
- CE: <14dBm
- SRRC: <20dBm
- MIC: <25dBm
- Recording: 1080p/720p
- OSD: Canvas mode
- Antenna: 1 (IPEX)
- Weight: 13.4g
- Storage: 32G
- Channels: 8
AVATAR V2 ANTENNA
- Frequency range: 5600MHz-6000MHz
- Size: R15 X 45mm(without cable)
- Input Impedance: 50Ω
- Polarization: LHCP
- Interface: IPEX-1
- Gain: 1.9dBi
- VSWR: ≤1.5
- Weight: 2g
Recommended (Not Included)
We recommend that when using more than 2s power to use a standalone BEC in between the VTX and power source to conserve the integrity of sensitive electronics;
Includes
- 1x Walksnail Avatar HD Nano Camera V3
- 1x Walksnail Avatar HD Mini VTX
- 1x Walksnail Avatar V2 Antenna
- 5x 2.1x3.4x1mm Gasket
- 2x M2x4/5/6mm Screws
- 4x M2*5*0.5mm Washer
- 1x 14 to19mm Bracket
- 1x 4 Pin Power Cable
- 4x M2x14mm Screws
- 1x 4 Pin USB Cable
More information
| SKU | 21126 |
|---|---|
| UPC (GTIN) | 724376353415 |
| Country of Origin | China |
Related Products
Customer Reviews
Andrey
Andrey
Good video quality and OK reach. BUT not a great product overall. So far I have 2 major problems with this system. 1. Horrible, stupid USB connector. It is so fragile I can not imagine it survives more then a few uses. I bent pins on my unit after second use and next time I tried to download files - pins broke off completely. So after about 5 flights it was dead. I still use it as fpv camera but I will never be able to update firmware or get files out of it. 2. GPS interference. Now I have 2 nano kits and they both render GPS unusable. I tried isolating GPS wires and VTX and it kind of worked on one larger quad. It still takes 4 minutes to lock location. After many attempts I gave up on getting GPS working on smaller quad. I am 100% sure the cause is this Walksnail kit.
Good video and radio as expected but physical connections are a problem
Duffy M.
As expected, video and the VTX radio are great. But the cable to the FC is hard-wired to the VTX with a JST-JH1.0 4p plug. Unless your FC has a jack for that, it's useless. Better would be a jack on the VTX like the full-size version. Or a MX1.5 plug like analog cameras where in-line jacks are available. Unless your FC has a usable jack, you will be scraping off the sealant, removing the provided cable and resoldering your own. Less of an is that the 20x20 mounts are threaded for M3 bolts. Why would the full-size version have 20x20 mounts threaded for M2 while the "nano" version is threaded for M3? Doesn't amke any sense. I want the nano VTX with 20x20 mounts threaded for M2 bolts and a jack on the VTX.