Walksnail Avatar HD Mini 1S Lite Kit (No Heat Sink)

0 reviews

$115.99

The Walksnail Avatar HD Lite Camera / Mini 1S VTX Kit features a lite digital camera, antenna, and mini VTX (no heat sink) that works with HD Goggles such as the Walksnail Avatar and Fat Shark HD Dominator.

About this Product

The Walksnail Avatar HD Lite Camera / Mini 1S VTX Kit features a Lite digital camera, antenna, and mini VTX (no heat sink) that works with HD Goggles such as the Walksnail Avatar and Fat Shark HD Dominator. This lite mini HD VTX combo has lower latency than the competitor at an average of 22ms, with an onboard DVR, 5.8GHz frequency, 8Gb internal storage, and a switchable aspect ratio.

2024 - Non Heat Sink version discontinued.

Note: This is the improved version of the mini VTX board which is smaller and does not include a heat sink (referred to as the Walksnail Avatar HD Mini 1S Lite Kit). This kit includes the updated HD Lite camera, not the Nano camera. The overall weight is 7.8g.

VIDEO: Walksnail Avatar Mini 1S VTX

Features

Lower latency than the competitor at an average of 22ms
5.1g Lightweight Mini VTX great for the 75x Quad
Walksnail Avatar Mini 1S VTX Module (No Heatsink)
Walksnail Avatar HD Lite Camera
Walksnail IPEX 1S Lite Antenna
Built-in 8Gb Internal Storage
1080p Screen Resolution
Switchable Aspect Ratio
5.8GHz Frequency
Onboard DVR
Canvas Mode
170° FOV
3.1V-5V

Specifications

AVATAR HD LITE CAMERA

Resolution: 1080P/60fps,720P/120fps,720P/60fps
Shutter Rolling: Rolling shutter
Dimensions: 14x14x16mm
Min.Illumination: 0.001Lux
Model: Avatar Lite camera
Image Sensor: 1/2.7”1nch
Ratio: 16/9 4/3
Aperture: F2.0
Lens: 2.1mm
Weight: 1.8g
FOV: 170°

AVATAR MINI 1S VTX MODULE (NO HEATSINK)

Transmitter Power: FCC<25.5dBm / CE <14dBm / SRRC <20dBm / MIC <25dB
I/O Interface: JST1.0 x 6 (Power In) to JST0.8 x 4 (USB)
Operational Frequency: 5.725-5.850GHz
Operating Temperature: -20° to 40°c
Supported FC Firmware: Betaflight
Video Resolution: 1080p / 720p
Dimensions: 30x30x6.5mm
Antenna Connector: IPEX
Bitrate: 25mbps/50mbps
Mounting: 25.5x25.5mm
Latency: 22ms Average
Internal Storage: 8GB
Input Voltage: 3.1-5V
OSD: Canvas Mode
Weight: 5.1g
Channels: 8

AVATAR 1S LITE VTX ANTENNA

Bandwidth: 5.6-5.9GHz (5600-5900MHz)
Input Impedance: 50Ω
Gain: 1.6dBi Average
Polarization: Linear
Connector: IPEX-1
Length: 70mm
VSWR: ≤1.5
Weight: 0.5g
Width: 5mm

Includes

1x Walksnail Avatar HD Lite Camera w/ Avatar Mini 1S VTX (No Heatsink)
1x Walksnail Avatar IPEX-1 1s Lite Antenna
1x 4-Pin Power Cable
2x 1.4x10mm Screws
4x 1.4x8mm Screws
1x 4-Pin USB Cable

FPV Regulatory Notice

The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Lumenier cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.