ShopMATEKSYS mLRS 900MHz Module KIT - mR900-30-TX
$45.49
The MATEKSYS mLRS 900MHz Module Kit - mR900-30-TX offers reliable long-range communication, ideal for drone flights and remote control applications.
About this Product
The MATEKSYS mLRS 900MHz Module Kit - mR900-30-TX offers reliable long-range communication, ideal for drone flights and remote control applications. It includes the mR900-30-TX module, IPEX MHF1 to SMA and RP-SMA adapter cables (5cm each), and a 5V fan (25×25×10mm) for stable operation. Customize your setup as needed.
Note: SMA antenna and 3D-printed case not included.
Features
- Reliable Long-Range Communication
- Adapter Cables Included
- mR900-30-TX Module
- Customizable Setup
- Cooling Fan
Specifications
mR900-30
- 915MHz RF Power: 21dBm (min) / 22dBm / 24dBm / 27dBm / 30dBm (1000mW)
- 868MHz RF Power: 24dBm (min) / 24dBm / 24dBm / 27dBm / 30dBm (1000mW)
- RF Frequency: 900MHz (868MHz, 915MHz FCC)
- Antenna Connector: IPEX MHF-1 to SMA
- STM32G431KB: mLRS firmware
- LoRa SX1262: TCXO
- PA/LNA: SKY68383-11
mRx-TX ADAPTER
- Fan Controller: Built-in 5V running if output power >= 500mW
- Power Supply: 5-13V DC @ JR_PIN3 (VIN)
- Bluetooth Module: Built-in HC-04
- mLRS Status: Red and Green LED
- Modes: DFU mode and Bind One
- Bluetooth status: Blue LED
- TX2: RC IN (CRSF)
Links
Binding
- After powering on, press the bind button (for approximately 4 seconds) on the receiver. When in bind mode, the green and red LEDs will blink alternately at approximately 2.5 Hz.
Binding Documentation - Binding Manual
Firmware
- Target: tx-matek-mr900-30-g431kb-default
- mLRS: Firmware Repository
Includes
- 1x MATEKSYS mLRS 900MHz Module Kit - mR900-30-TX
- 1x IPEX MHF1 to RP-SMA adapter cable (5cm)
- 1x IPEX MHF1 to SMA adapter cable (5cm)
- 1x 5V Fan (25×25×10mm) with screws
More information
| SKU | 22452 |
|---|---|
| UPC (GTIN) | 724376364800 |
