MATEKSYS H743-WLITE Flight Controller
The MATEKSYS H743-WLITE Flight Controller is equipped with STM32H743VIH6, ICM42688-P, DPS310, OSD, 7 UARTs, 1 CAN, 2x I2C, 12x PWM outputs, and 3x BEC and other cool features that make this FC a winner in the wing game!
About this Product
The MATEKSYS H743-WLITE Flight Controller is equipped with STM32H743VIH6, ICM42688-P, DPS310, OSD, 7 UARTs, 1 CAN, 2x I2C, 12x PWM outputs, and 3x BEC and other cool features that make this FC a winner in the wing game!
Features
- Equipped with BEC 5V output, which is designed for flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Equipped with BEC 9V/12V output, which is designed for Video Transmitter, Camera, Gimbal etc.
- Equipped with MATEKH743 firmware
Specifications
- MCU: STM32H743VIH6, 480MHz , 512KB RAM, 2MB Flash
- IMU: ICM42688-P
- Baro: DPS310 (I2C2)
- OSD: AT7456E
- Blackbox: MicroSD card slot (SDIO)
- 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
- 13x PWM outputs(12+LED)
- 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 2x I2C
- 1x CAN
- USB/Beep Extender with Type-C(USB2.0)
- Dual Camera Inputs switch
- 9V(12V) for VTX power switch
- High-precision Current Sense, 220A range
- ADC VB2 voltage divider: 1K:20K
- ADC AirSpeed voltage divider: 20K:20K
FC Firmware
- INAV: MATEKH743
- ArduPilot: MATEKH743
PDB
- Input voltage range: 6.8~30V (2~6S LiPo)
- 1x ESC power pads
- Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
- Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
- Sense resistor: 90A continuous, 220A peak
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps, Max.3A
BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.
- Continuous current: 2 Amps, Max.3A
- 12V option with Jumper pad
- for stable 9V/12V output, input voltage should > output voltage +1V
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 8 Amps, Max.10A
- for stable Vx output, the input voltage should > Vx voltage +1V
BEC 3.3V output
- Designed for Baro / Compass module and external 3.3V peripherals
- Linear Regulator
- Continuous current: 200mA
Physical
- Mounting: 25 x 25mm, Φ2mm
- Dimensions: 44 x 29 x 14.5 mm
- Weight: 22g w/ USB/buzzer adapter
Includes
- 1x H743-WLITE
- 1x USB(Type-C)/Beep (Passive buzzer) Extender
- 1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
- 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
- 1x Rubycon ZLH 35V 470uF capacitor
- Dupont 2.54 pins (Board is shipped unsoldered)
More information
| SKU | 19034 |
|---|---|
| UPC (GTIN) | 764613347487 |
| Country of Origin | China |
Related Products
Customer Reviews
ItÛªs a great controller but
bill y.Verified buyer
ItÛªs a great controller but I wish that it would come soldered as some people donÛªt have steady hands to work with small items . I would pay the extra cost for that convenience .
Pin Layout is frustrating. Far more expensive than F405.
Malin H.Verified buyer
Pin layout is questionable. For some reason the video-in pins are on the back side of the board, when your camera is nearly always on the front of the aircraft. Because of this my video-in wires have to run nice and close to the esc and battery wires :P There would be space for those video-in pins on the front if the VB2 and CU2 voltage dividers were towards the rear of the board with the VB1 & CU1 pads and the main power pads from batt and esc. Different builds might prefer different pad layouts, but this layout seems like it will be a bummer for nearly everyone. The F405-wing (which is now discontinued) had plenty of processor headroom, a ton of UARTS, and (IMO) a better pin layout. Probably wont get this one again.
Cant beat Matek!
Michael B.Verified buyer
Cant beat Matek!
Great flight controller
Marco T.Verified buyer
Excellent little flight controller with enough ports to do anything you want.
Good quality
anthony m.Verified buyer
Good quality