MATEKSYS F405 Wing V2 Flight Controller

Introducing the MATEKSYS F405 Wing V2 Flight Controller, the ultimate choice for precision flight control in fixed-wing aircraft. With cutting-edge technology and an F405 processor, it ensures smooth, stable flights with lightning-fast processing speeds. Versatile compatibility allows seamless integration with peripherals for customization. Compact and robust, it's your go-to for optimal control and efficiency in aerial adventures. 

VIDEO: Matek F405-Wing V2

• Ensures smooth and stable flights
• Lightning-fast processing speeds
• Efficiency in aerial adventures
• Cutting-edge F405 processor 
• Integration with peripherals
• Compact and robust design
• Precision flight control
• Versatile compatibility 
• Optimal control

• MCU: STM32F405RGT6, 168MHz, 1MB Flash
• UARTs: 6, 1x Softserial_Tx option (INAV)
• ADC: 3 (VBAT, Current, RSSI)
• Built-in inverter: SBUS input
• Blackbox: MicroSD card slot
• USB: Type-C (USB2.0)
• IMU: ICM42688-P
• PWM outputs: 10
• OSD: AT7456E
• Baro: DPS310
• I2C: 2
• BEC 5V output:
  • Designed for: Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS module, AirSpeed
  • Continuous current: 2 Amps
• PDB
  • Battery Voltage divider 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
  • Current Sensor: 220A, 3.3V ADC (INAV scale 150, ArduPilot 66.7A/V)
  • Input voltage range: 930V (36S LiPo) with TVS protection
  • Sense resistor: 100A continuous, 220A peak
• BEC 9V /12V output:
  • Stable 9V/12V output: Input voltage should be greater than output voltage +1V
  • Designed for: Video Transmitter, Camera, Gimbal, etc
  • 12V option usage: with Jumper pad
  • Continuous current: 2 Amps
• BEC Vx output
  
  • Stable Vx output: input voltage should be greater than Vx voltage +1V
  • Voltage adjustable: 5V Default, 6V or 7.2V options
  • Continuous current: 5 Amps, 6A Peak
• FC Firmware
  
  • ArduPilot: MatekF405-Wing (ArduPlane 4.4 or newer)
  • INAV: MATEKF405SE (INAV 6.0 or newer)
• Physical
  • Mounting: 30.5 x 30.5mm, 4mm with Grommets 3mm
  • Dimensions: 54 x 36 x 13 mm
  • Weight: 25g
• BEC 3.3V output
  
  • Designed for: external 3.3V peripherals
  • Continuous current: 200mA
  • Regulator: Linear 

• 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port
• 3x Dupont 2.54 pins (Board is shipped unsoldered)
• 1x MATEKSYS F405 Wing V2 Flight Controller