Lumenier LUX HD AIO - G4 FC + 35A BLHeli_32 3-6S ESC
The Lumenier LUX HD AIO G4 Flight Controller + ESC is a powerful AIO ready to power the DJI O3 in a simple configuration.Â
About this Product
The Lumenier LUX HD AIO G4 Flight Controller + ESC is a powerful AIO ready to power the DJI O3 in a simple configuration. It also works great on standard analog systems with the onboard analog OSD chip. The LUX HD AIO G4 builds on all the best features of its predecessors and further improves on hardware components and layout, and is now dedicated to a design for the DJI systems. This AIO uses a G4 processor along with top-of-the-line hardware from the 35A BLHeli_32 3-6S ESC powered by four F4 processors! Unleash the capabilities of your FPV Racing Quadcopter with the Lumenier LUX HD AIO G4 Flight Controller! This LUX HD AIO G4 comes in a standard 25x25mm form factor weighing only 10.3g.
Note: This AIO works with both the DJI O3 and other Digital FPV Systems. This AIO is also Analog compatible.
Features
- Low resistance Mosfet with Metal case, up to 6s 35A supported
- Analog current sensor3~6S Lipo (12.6~25.2V) Input
- 16M Flash Memory Blackbox
- 25x25mm Mounting Pattern
- OSD (Analog / Digital)
- G473 Flight Controller
- 35A BLHeli_32 ESC
- ICM42688 Gyro
- DJI Ready
Specifications
- MCU: STM32G473 / 170Mhz / 512KB Flash
- BEC: 2x BEC, 5V and 10V, 2.5A each
- VBAT Input: 8-32V, 3-6S Lipo
- Blackbox: 16MB (128M Bit)
- MOSFET: Low resistance
- ESC MCU: F4 BLHeli_32
- Amperage: 35A up to 6S
- Current sensor: Analog
- Dimensions: 36x36mm
- DJI Digital Port: Yes
- Gyro: ICM42688
- LED: WS2812b
- FC MCU: G473
- PMW Output: 4
- Weight: 10.3g
- Beepers: Yes
- OSD: Yes
- 12C: 1
Recommended (Not Included)
- Lumenier LUX HD AIO - G4 FC + 35A BLHeli_32 3-6S ESC - Solderless
Includes
- 1x Lumenier LUX HD AIO - G4 FC + 35A BLHeli_32 3-6S ESC
- 4x M2x12mm Socket Cap Screws
- 4x M2x8mm Non Threaded Spacers
- 4x M2x4mm Threaded Spacers
- 1x DJI Plug-N-Play Cable
- 1x 5-Pin Micro JST Cable
- 1x 220uF 25V Capacitor
- 1x XT30 LiPo Pigtail
- 1x 4-Pin Micro JST
- 4x M2 Nuts
More information
| SKU | 20485 |
|---|---|
| UPC (GTIN) | 724376354962 |
| Country of Origin | China |
Related Products
Customer Reviews
great aio
Ethan W.Verified buyer
it was super easy to solder on with the big solder pads. An all around great aio for a cinewhoop
It works, kinda annoyed I did not investigate it more before purchasing though.
Sam
I bought this flight controller because it was bundled with the qav pro nano. The documentation is pretty scarce. You get the 2 page manual with the pin out and that's it, and the manual is not that clear. Maybe this is just me being dumb but I was confused by why there are 2 differently colored uart tx/rx1 pin outs, I thought one was maybe the i2c bus, but after looking really closely to the board diagram, the i2c bus is on 2 tiny tiny pads near the g4 chip on the back (Good luck if you need i2c), I think the green tx/rx 1 is for a receiver. I thought since it was with the bundle it would be a good choice. Its really new, you have to use beta flight 3.5 which is not technically even out yet. Besides that I have had zero issues with it. All the bells and whistles of bl heli 32 work. The information on G4 processors is pretty scarce so I don't even know what the benefits would be over using a much more well documented luminaire f7 or f4 AIO. Regardless, it works and I am very happy with the performance, but the lack of clear documentation really sucked and I feel kind of blind sided in having to use betaflight 3.5.