Holybro M10 Standard GPS w/ 10-Pin Cable
The Holybro M10 GPS uses multi-constellation GNSS powered by the u-blox M10 series, a concurrent GNSS receiver that can receive and track multiple GNSS systems.
About this Product
The Holybro M10 GPS uses multi-constellation GNSS powered by the u-blox M10 series, a concurrent GNSS receiver that can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture, all four major GNSS constellations, GPS, Galileo, GLONASS, and BeiDou, can be received concurrently. It also has the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are three different connector options for various purposes. This module ships with a baud rate of 115200 5Hz. The high-gain 25 x 25 mm patch antenna provides excellent performance, and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna with a rechargeable backup battery for warm starts.
Features
- The newest Ublox 10th Gen GNSS
- High-gain 25*25*4mm antenna
- Internal Buzzer, Safety switch
- Fast & Accurate Positioning
- Ultra Bright UI RGB LED
- IST8310 Compass
Specifications
- Model: Holybro M10 GPS
- GNSS Receiver: Ublox M10
- Number of Concurrent GNSS: Up to 4 GNSS
- BeiDou
- Galileo
- GLONASS
- GPS
- QZSS
- Frequency Band:
- GPS L1
- Galileo E1
- GLONASS L1
- BeiDou B1
- SBAS L1
- QZSS L1
- Compass: IST8310
- Output Protocol:
- UBX (U-blox)
- NMEA
- Accuracy: 2.0m CEP
- Nav. Update Rate:
- Up to 25 Hz (single GNSS)
- Up to 10 Hz (4 concurrent GNSS)
- GNSS Augmentation System
- EGNOS, GAGAN, MSAS and WAAS
- QZSS: L1S
- Default Baud Rate: 115200
- Input Voltage: 4.7-5.2V
- Port Type: JST-GH-10P
- Antenna: 25 x 25 x 4 mm ceramic patch antenna
- Power consumption: Less than 200mA @ 5V
- Operating Temperature: -40~80C
- Dimension: 50 x14.4 mm
- Weight: 32g
- Cable Length: 26cm (42cm cable purchase separately)
- Other: Tri-color LED, Onboard Buzzer, Safety Switch, LNA MAX2659ELT+ RF Amplifier, Rechargeable Farah capacitance, Low noise 3.3V regulator
IMPORTANT NOTES
- M10 GPS Requires PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer.
Includes
- 1x Holybro M10 Standard GPS w/ 10-Pin Cable
- 1x Fixed Carbon Fiber GPS mount
More information
| SKU | 21424 |
|---|---|
| UPC (GTIN) | 724376356607 |
