Antennas

Lumenier AXII HD Set

Lumenier AXII HD Set

The Lumenier AXII HD 5.8GHz Antenna Combo Set for DJI Digital HD FPV Goggles. A combo set of circular polarized antennas specifically designed for the DJI Digital HD FPV Goggles. Designed to provide long range 5.8Ghz video reception in a compact form factor.

Finally, a high-quality set of antennas designed as a direct replacement and upgrade for your stock DJI antennas for the DJI Digital HD FPV Goggles. The AXII HD antennas were designed from the ground up to be a perfect match for the DJI goggles. The AXII HD antennas are form fitting, low profile, color matching, direct connect RP-SMA, and all this with improved performance.

The Lumenier AXII HD 5.8GHz Patch Antenna offers you the highest performance you can get from a high gain mini patch antenna designed for DJI Digital HD FPV.

The Lumenier AXII HD Patch has a high 8.2 dBiC gain for long range flying and excellent penetration through objects compared to standard omnidirectional FPV antennas. It also features an incredible 92% efficiency (most mini patch antennas are below 75%), which means you get amazing performance and the best picture in your video goggles. Lumenier, designed in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the Lumenier AXII HD 5.8GHz Patch Antenna.

The Lumenier AXII HD Stubby has been based on the extremely popular AXII 2 Stubby antenna, but further customized to be a direct fit for the DJI HD Goggles. The AXII HD Stubby comes with a custom RP-SMA connector designed to directly and securely screw onto the DJI Goggles. No adapters needed! This makes for an ultra-compact and efficient setup since you don’t need to lose any dB with extra adapters.


  • Specifications
    • AXII HD Patch Antenna
    • Frequency: 5.8GHz
    • Bandwidth: 220 Mhz
    • Gain: 8.2 dBiC
    • VSWR: 1:1.1 - 1:1.3
    • Radiation Efficiency: 92%
    • Beam Width: 68° H. 68° V.
    • Polarization: (LHCP) Left Hand Circularly Polarized
    • Connector: RP-SMA (Fits DJI Goggles directly, not to be used on standard SMA)
    • Dimensions: 73mm x 35mm x 9mm (21mm with SMA)
    • Weight: 22g each
    • AXII HD Stubby Antenna
    • Gain: 2.2dbic
    • Axial ratio: 1.0 (near perfect)
    • Bandwidth: 5.3GHz-6.2GHz
    • Beam Width: 360 degrees (omni-directional)
    • SWR: <=1.5:1
    • Weight: 6g
    • Size: 26mm x 17.5mm
    • Connector: RP-SMA (custom long)
    • Works great as both a transmitting or receiving antenna
    • Compatible with other styles of 5.8GHz LHCP antennas
    • Polarization: (LHCP) Left Hand Circularly Polarized
Lumenier Double AXII 2

Lumenier Double AXII 2

The Lumenier AXII 2 is known to be the most versatile and highest performing antenna line for FPV today. Lumenier has been able to improve on the best and make it even better with the new and unqiue Double AXII 2 antenna!

Double the Gain = Longer Range

One of the biggest features of the Double AXII antenna is unique combination of 2 antenna elements into a single high gain antenna network. With precision manufacturing and fine tuning each Double AXII is able to effectively more than double the gain of a standard AXII 2 antenna from 2.2 to an incredible 4.7dBiC! This means you can fly further or behind more objects and still have a clear FPV video signal.

High Gain + Omni-Directional

High gain antennas aren't anything new. You can find many patch, helical, cross-hair style antennas which will offer high gain, but the downside is they are extremely directional. This means they only work well in the direction they are pointing.

The Double AXII 2 antenna is omni-directional, meaning it works 360 degrees around you. You can fly in front, behind, or to the sides and still have the same great reception. It doesn't matter where you are pointing, you will have great signal all around you!

Best on Receiving or Transmitting?

The Lumenier Double AXII 2 antenna can work for both receiving or transmitting, however due to the nature of the radiation pattern it is best suited as a receiving antenna in most cases. The higher gain gives you much longer range in a "doughnut" style radiation pattern, but it does have some nulls directly above/below the antenna and some small nulls around the 50 degree areas.

As a receiving antenna if you have the Double AXII 2 in a vertical orientation you will have excellent signal all around you in a 32 degree FOV. You can do the same by putting the antenna on the transmitter of your aircraft, however during flight if you tilt or bank a lot you may run into the null areas of the antenna. This is why it is generally best used as a receiving antenna. But don't let us stop you from getting creative! Need an antenna on your plane for an ultimate long range mission? This may be the perfect fit for you.


  • Specifications
    • Gain: 4.7dBiC
    • Axial ratio: 1.0 (near perfect)
    • Bandwidth: 5.3GHz-6.2GHz
    • Radiation Efficiency: 98%
    • SWR: <=1.5:1
    • Weight: 17g
    • Size: 190mm x 17.5mm
    • Cable: Semi-rigid RG402
    • Connector: Right-Angle SMA
Lumenier AXII DUO Patch Antenna 5.8GHz

Lumenier AXII DUO Patch Antenna 5.8GHz

The Lumenier AXII DUO Patch Antenna (RHCP). A ultra-high gain, long range, circular polarized receiver antenna. Designed to provide long range 5.8Ghz video reception in a compact form factor.

The Lumenier AXII DUO 5.8GHz Patch Antenna offers you the highest performance you can get from a high gain mini patch antenna designed for FPV. The Lumenier AXII DUO Patch has an industry leading 12.2 dBiC gain for long range flying and excellent penetration through objects compared to standard omni-directional FPV antennas. It also features a best in class 95% efficiency (most mini patch antennas are below 75%), which means you get amazing performance and the best picture in your video goggles. Lumenier, designed in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the Lumenier AXII DUO 5.8GHz Patch Antenna.

The AXII DUO builds on the same principles as the high performing AXII Patch Antenna, but the DUO doubles the receiver elements resulting in increased gain and performance. Each DUO contains 2x active elements installed with extreme precision ensuring optimal performance across the entire 5.8GHz band. With an incredible 280MHz wide bandwidth you'll get great signal no matter which channel you're on.


  • Specifications
    • Frequency: 5.8GHz
    • Bandwidth: 280 Mhz
    • Gain: 12.2 dBiC
    • Beam Width: 80° H. 40° V.
    • Right Hand Circularly Polarized
    • SMA Connector (Fits Fat shark Goggles and others using SMA)
    • Dimensions: 73mm x 35mm x 9mm (21mm with SMA)
    • Weight: 18grams
The Lumenier AXII 2 5.8GHz Antenna

The Lumenier AXII 2 5.8GHz Antenna

The Lumenier AXII is known to be the most versatile and highest performing antenna line for FPV today. Lumenier has been able to improve on the best and make it even better!

Improved Features

  • Significantly Improved Range with a Higher Gain (2.2dBic Gain)
  • Wider Bandwidth (5.3-6.2GHz)
  • Cleaner Signal And Better Rejection to Interference
  • More Durable - Improved Injection Molded Housing
  • Virtually Perfect Axial Ratio

While almost every aspect of the AXII 2 was improved upon, the size and weight managed to stay the same. The AXII 2 is still one of the smallest and lightest circular polarized antennas on the market, perfect for both lightweight racing builds or freestyle quads.

The AXII 2 comes in many connector types such as SMA, MMCX, U.FL, Stubby SMA, and Long SMA. Precision engineering has given this antenna a virtually perfect 1.0 Axial ratio resulting in a true circularity. On top of that, the AXII 2 has an amazing max gain of 2.2dBic, a true upgrade over the original AXII.

Super Tough

Antennas take a lot of abuse, especially when put onto a quad. The AXII 2's robust antenna housing is made out of a new injected molded polycarbonate, and ultra-sonically welded shut. This has significantly improved the durability of the AXII housing. The 45mm long semi-rigid RG402 cable allows for 90 degrees or more of freedom. The SMA connection is reinforced with a metal collar crimped to the base for extra support.


  • Specifications
    • Gain: 2.2dbic
    • Axial ratio: 1.0 (near perfect)
    • Bandwidth: 5.3GHz-6.2GHz
    • Weight: 7.6g
    • Size: 70mm x 16mm
    • Cable: Semi-rigid RG402
    • Connector: SMA
    • Works great as both a transmitting or receiving antenna
Lumenier PentaPro 5.8G 10dBi Antenna for Digital HD

Lumenier PentaPro 5.8G 10dBi Antenna for Digital HD

The Lumenier PentaPro 5.8G Antenna brings HD FPV transmission range and penetration up to the next level. The PentaPro has been designed specifically for Digital HD with a high gain (10dBi) directional 110 degree beam width. It is a perfect upgrade Antenna for the Connex HD and ProSight receivers.

The PentaPro is a linear equivalent to the crosshair, with a clean radiation pattern and great efficiency. The antenna covers the whole 5GHz ISM band making it a great match for digital HD systems. This antenna was designed and tuned by FPV antenna expert Hugo of TrueRC.

It is suggested to install the SMA extension cables on the receiver unit first, then bend into shape to fit onto the PentaPro antenna.


  • Specifications
    • Frequency: 5-6GHz
    • Gain: 10 dBi
    • Polarization: Linear polarization
    • Beam-width*: 110deg
    • Beam-width @-3dB**: 65deg.
    • Connector: SMA male
    • Dimension: 4" x 4" x 0.5"
    • Included: 5x 10cm low-loss semi-flexible extension SMA cables & 1x Lumenier PentaPro 5.8G Antenna
Lumenier Pagoda 2 5.8GHz Antenna

Lumenier Pagoda 2 5.8GHz Antenna

The Lumenier Pagoda 2 Antenna is an omni-directional circularly polarized 5.8GHz FPV antenna with great performance and small in size. The Pagoda 2 Antenna was designed by Maarten Baert and manufactured by Lumenier under the Creative Commons License.

The Lumenier Pagoda 2 Antenna has an excellent omnidirectional radiation pattern along with a good axial ratio, giving you solid all around coverage. The Pagoda does not come with a protective case like the Lumenier AXII Antenna, but you can print your own 3D printed cover as an alternative.

This antenna's simplified manufacturing process keeps costs low allowing for a great low price for an antenna with high performance.

More information on the Pagoda 2 Antenna design can be found here.


  • Specifications
    • Gain: ~2dbic
    • Axial ratio: < 1.3
    • Bandwidth: 5.5GHz-6.05GHz
    • Radiation Efficiency: 95%
    • SWR: S11 < -20 dB, VSWR < 1.22 (at center frequency)
    • Weight: 8g
    • Size: 65mm x 22.5mm
    • Cable: Semi-rigid RG402
    • Connector: SMA (crimp shield + heat shrink)
    • Works great as both a transmitting or receiving antenna
    • Compatible with other styles of 5.8GHz RHCP antennas
The Lumenier AXII 5.8GHz Antenna

The Lumenier AXII 5.8GHz Antenna

The Lumenier AXII 5.8GHz Antenna makes a giant leap forward in FPV antenna technology. Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you one of the smallest, lightest and best performing FPV antennas in the world. The AXII antenna is an original design that features a new RF pathway technology (unique hybrid network) allowing it to be incredibly light weight (7.6g) and less than half the size of most other 5.8GHz CP antennas.

Even though the AXII is both small and light weight, it does not sacrifice any performance. In fact it out performs most other antennas in all categories. Precision engineering has given this antenna a near perfect 1.0 Axial ratio resulting in a true circularity. On top of that, the AXII has a high max gain of 1.6dBic enabling better range and penetration. It has a wide bandwidth covering the popular FPV 5GHz band from 5.5GHz-6.0GHz, ensuring you have a clear and strong signal no matter which frequency you're on.

The AXII is designed to be ultra durable and put up with the beatings FPV pilots put on their antennas. The cable is a semi-rigid, black coated RG402 cable and 45mm long, allowing for 90 degrees or more of freedom. The SMA connection is reinforced with a metal collar crimped to the base for extra support. The outer shell case is made from an impact resistant polycarbonate material, and it is sealed shut to guard the antenna elements inside. Note: When installing, secure the antenna via the SMA connector, do not twist the cap.


  • Specifications
    • Gain: 1.6dbic
    • Axial ratio: 1.0 (near perfect)
    • Bandwidth: 5.5GHz-6.0GHz
    • Weight: 7.6g
    • Size: 70mm x 16mm
    • Cable: Semi-rigid RG402
    • Connector: SMA
    • Works great as both a transmitting or receiving antenna
Lumenier AXII Patch Antenna 5.8GHz

Lumenier AXII Patch Antenna 5.8GHz

The Lumenier AXII 5.8GHz Patch Antenna offers you the highest performance you can get from a mini patch antenna designed for FPV. The Lumenier AXII Patch has an industry leading 8.4 dBiC gain for long range flying and excellent penetration through objects compared to standard omnidirectional FPV antennas. It also features a best in class 95% efficiency (most mini patch antennas are below 75%), which means you get amazing performance and the best picture in your video goggles. Lumenier, designed in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the Lumenier AXII 5.8GHz Patch Antenna.

The Lumenier AXII Patch Antenna features an ultra-thin active element suspended above the reflector, which allows for a higher velocity factor and lowers losses. This technology along with precision manufacturing results in a top of the line receiving antenna. It works great on both video goggles or ground stations for 5.8GHz, and capabale of receiving signal up to many miles away.


  • Specifications
    • Frequency: 5.8GHz
    • Bandwidth: 220 Mhz
    • Gain: 8.4 dBiC
    • Beam Width: 76°
    • Right Hand Circularly Polarized
    • SMA Connector (Fits Fat shark Goggles and others using SMA)
    • Dimensions: 35mm x 35mm x 9mm (20mm with SMA)
    • Weight: 10grams
Lumenier Micro AXII 5.8GHz Antennas

Lumenier Micro AXII 5.8GHz Antennas

The Lumenier Micro AXII 5.8GHz Antenna is the next evolution of the world's most popular FPV antenna. The Micro AXII has the same incredible performance as the original AXII antenna, but now 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the smallest, lightest and best performing FPV antennas in the world. The Micro AXII antenna is an original design that features a new RF pathway technology (unique hybrid network) allowing it to be incredibly lightweight (1.6g) making it the smallest and lightest 5.8GHz CP antenna.

Even though the Micro AXII is both small and lightweight, it does not sacrifice on performance. In fact, it outperforms most other antennas in all categories. Precision engineering has given this antenna a near perfect Cross-Polar Rejection resulting in a true circularity. This means an RHCP Micro AXII antenna rejects nearly 100% of LHCP signals, giving you a crystal clear image free of multi-pathing noise. On top of that, the Micro AXII has a high max gain of 1.6dBic enabling better range and penetration. It has a wide bandwidth covering the popular FPV 5GHz band from 5.5GHz-6.0GHz, ensuring you have a clear and strong signal no matter which frequency you're on.

The Micro AXII is designed to be ultra durable and put up with the beatings FPV pilots put on their antennas. The entire antenna array is securely protected inside the injection molded outer casing. The outer shell case is made from an impact resistant polycarbonate material, and it is sealed shut to guard the antenna elements inside.


  • Specifications
    • Gain: 1.6dbic
    • Cross-Polar Rejection: -10 to -28dB (2.4%)
    • Bandwidth: 5.5GHz-6.0GHz
    • Radiation Efficiency: 98%
    • SWR: <=1.5:1
    • Weight: 4g
    • Size: 12mm x 9mm
    • Cable: Flexible RG178
    • Cable Length: 30mm
    • Connector: SMA
    • Compatible with other styles of 5.8GHz RHCP antennas
CAGE Code: 84VM0
Copyright © 2023 Lumenier. All Rights Reserved.
NOTION Design Group